St.Hua Private School

CPU: STM32F103VET6, TQFP100 feet; FLASH: 512K BYTES, SRAM: 64KBYTES

Board Recource

• JTAG Debug Interface
  
• Power supply LED (green), 3 status LED (blue)
  
• RS232, UART1 supports 3-line ISP, UART2 is TTL communication port of the switch interface (TTL-level model to facilitate monitoring of data, and can communicate through the PC to the TTL interface devices to control, the typical application is connected to GPS OEM board )
  
• TTL communication interface.
  
• CAN bus interface
  
• USB2.0 SLAVE mode interface.
  
• Micro SD (TF) card socket, interface with SDIO mode.
  
• 2.4-inch TFT (240X320 (with touch screen) interface, using MCU-FSMC 16-bit interface mode control.
• SPI bus control AT45DB161D (2M BYTES) serial FLASH
  
• RTC with battery back-up battery seat
  
• SPI bus control ENC28J60 network interface (10M)
  
• I2C bus control, FM radio module (TEA5767)
  
• SPI bus, the control of VS1003 MP3 audio decoding circuit.
  
• voice input interface.
  
• AD input interface
  
• Rd PWM Interface
• On-board 4 * 4 Mini Keyboard (for the expansion of functional design, such as the T9 input method)
  

Sample Code include:

1. SPI AT45DB161D-SU to read and write
2. RTC
3. Asynchronous serial communication
4. ADC
5. PWM
6. CAN Bus Transceiver
7. SDIO interface, routine mode of SD card reader
8. SDIO interface to the way SD card file system Tini Fatfs0.07C
9. FSMC 16-bit mode of the TFT driver .
10. Resistive touch screen driver .
11. FSMC 16-bit mode ucos2.86, UCGUI3.90A presentation .
12. Ucos2.86 .
13. PC computer through USB interface, SD card read-write .
14. Keyboard USB analog PC joystick control cursor movement
15. FM radio
16. SD card file system, MP3 player under the
17. Ethernet communication
18. USB driver routines online programming MCU

Document:

1. Development board schematics drawings
2. Development Board Hardware Manual
3. Serial-line programming instructions
4. JTAG-circuit programming instructions
5. USB-circuit programming instructions